IBeam curtain tracks permit drapes in the bay window to to hold or flush using a ceiling. They are able to turn to enable constant drapes that run-around corners or into odd- nooks. IBeam architectural curtain courses need no specific resources to everyone and contour can install them using a tiny bit of expertise using a pencil as well as a screw gun. When utilized together with big plate glass windows, Ibeam drape tracks can produce a gentle, but contemporary appearance that conventional curtain rods only can not fit.
Quantify the planned route for the Ibeam architectural curtain course, enabling corners. Make use of a hack saw to reduce at an approximate amount of path in the roll of Ibeam path. Make use of a stud finder to find the ceiling joists that drop across the route of the drape course. Indicate the stud places lightly using a pencil.
In case a corner is needed, turn the course by hand. Take advantage of the tube or your knee the stuff was sent in to help softly form a a large part. Don’t over turn the stuff.
Snap the ceiling mounts to the groove at the most effective portion of the course. Hold the monitor from the ceiling over the setup course — enlist a buddy to in the event the course is long, to to put on one end. Slip the ceiling mounts along the Ibeam stuff until each bracket lines up having a joist. Mark the pre-drilled holes of the mounts using a pencil onto the ceiling. Take away in the Ibeam and place both aside.
Drill pilot holes at every ceiling mark by means of a screw gun and 1/8-inch drill-bit, driving right each joist. Add the screwdriver bit to the screw gun. Install the initial ceiling mount inch screws drilled into the start of the course. the pilot holes at Continue across the road of the curtain course, installing the ceiling brackets all.
Snap the drape track to the ceiling mounts, using care to line up any corners. So your body of the conclusion quit rests below the trail the primary end stop on the end-of the course. Tighten the setscrew to the initial end stop. Slide the drape racks of your choice on the trail, paying careful focus on the path of the curtain hooks. Slip the staying end quit onto the open-end of the course and tighten it securely.