No one wishes to visit uneven paving stones, but they’ll be irregular if the ground beneath them isn’t level. Leveling the ground happens before paving stones, or pavers, are laid back. If you produce a firm foundation that drains water off, then your pavers will be level once you put them on top of this foundation.
Push bets 5 to 8 inches to the bottom at which you’ll have the boundaries of a path or other project, placing the stakes around where each paver will soon break.
Tie a string between the stakes at bottom level. The string will indicate the top of the pavers.
Dig 6 inches to the ground across the area where the pavers will break.
Place a carpenter’s level on the ground in which you dug, and examine the instrument to see whether the spot is level. If the place isn’t level, then eliminate the carpenter’s degree and move soil to create a more level base. Keep checking the spot for levelness and moving soil until the place is level.
Lay landscape fabric over the ground if you intend to create a path of constant pavers. Skip this task if you would like to install personal pavers where grass will grow between them.
Remove the bets. Pin the landscape fabric down on the borders of the path or alternative project with bender-board edging.
Cover the ground with a 2-inch deep layer of gravel. The gravel will allow water to drain.
Scatter a 2-inch deep layer of sand over the gravel. Dampen the sand gently with water from a hose sprayer. Smooth the moist mud using a rake.
Tamp the sand with a hand to flatten it. Examine the cover of the sand to get levelness with the carpenter’s degree, and transfer mud as needed until the cover of the sand is level. Afterward, pavers can be set in addition to the prepared area.